16-18
WX 1
Abb. 36:
WFE Anschluss vorn
Abb. 35
Abb. 33
Abb. 34
Abb. 32
Bildschirmschoner einstellen
1. Parametermenü aufrufen.
2. Menüpunkt Bildschirmschoner auswählen und bestätigen.
3. Bildschirmschoner mit dem Dreh-Klick-Rad (7) aus- oder
einstellen.
4. Wert mit der Eingabe-Taste (6) bestätigen.
7.3
Firmware update durchführen
1. WX 1 Lötstation ausschalten.
2. Speicherstick in die USB-Schnittstelle einstecken.
3. WX 1 Lötstation einschalten.
Firmware update wird automatisch durchgeführt (siehe Abb. 34).
Falls Sie eine aktuellere Firmware bereits auf Ihrer Station installiert
haben, wird diese nicht verändert.
Hinweis Während das Firmware update läuft, darf die Station nicht
ausgeschalten werden.
7.4
Zusatzgeräte anschließen
Beachten Sie die Übersichtabbildungen (Abb. 7 / Abb. 8, Seite 10).
Zusatzgeräte können entweder an der Schnittstelle an der Frontseite
(23) und/oder an der Schnittstelle auf der Rückseite (18) der WX 1
Lötstation angeschlossen werden.
Die WX 1 Lötstation erkennt automatisch, welches Zusatzgerät
angeschlossen ist. Die WX 1 Lötstation zeigt die Schnittstelle vorn
(23), siehe Abb. 35) oder die Schnittstelle hinten, das Symbol oder
den Namen des angeschlossenen Zusatzgeräts (23/18) an.
7.5
Parameter der Zusatzgeräte einstellen
Beachten Sie die Übersichtabbildungen (Abb. 7 / Abb. 8, Seite 10).
1. Zusatzgerät über Zusatzgerät-Taste (vorn/hinten) (4, 10)
auswählen.
Einstellbarer Parameter erscheint im Display (z. B. Drehzahl).
2. Den gewünschten Wert mit dem Dreh-Klick-Rad (5) einstellen.
3. Wert mit der Eingabe-Taste (6) bestätigen
oder
Taste 4 zum verlassen drücken.
8
WX 1 pflegen und warten
Z
Bedienpanel mit geeignetem Reinigungstuch bei Verunreinigung
reinigen.
Z
Nicht verwendete Schnittstellen mit Verschlusskappen
verschließen.