Weller WR 2, Operating Instructions Manual

Page: 78 / 108

DSX 120 5-8
DE
EN
FR
IT
ES
PT
NL
SV
DK
FI
GR
TR
CZ
PL
HU
SK
SL
EE
LV
LT
The manufacturer accepts no liability for any damage resulting from
failure to use the device in compliance with these operating
instructions or unauthorised modifications to the device.
3 Included in delivery
DSX 120 packed T0051319899
 DSX 120 desoldering iron, T0051319899

XDS 1 Suction Nozzle Ø 1.4 mm T0051325099
 Tip Cleaner WXDP/DSX 120 T0058765772

Filter for glass tube (10 pce.) T0051360499

Bounding cap (1 pce.)
 Operating Instructions for DSX 120
4 Device description
4.1 Desoldering iron DSX 120
The DSX 120 desoldering iron can be connected to all electronically
controlled WELLER desoldering tools with 120 W power ratings. A
high-quality sensor and heat transfer system guarantee precise
temperature control of the desoldering tool. The desoldering iron is
ideal for reworking and repairing conventional and SMD circuit
boards. A range of XDS Series suction nozzles provides solutions to
many desoldering problems. The suction process is started by
operating the finger switch. The tin collecting container comprises a
glass tube with a filter. The glass tube can be replaced easily and
quickly, minimising maintenance on the desoldering iron. The
handle, power cord and vacuum hose are made of an antistatic
material, which complements the high quality of this desoldering
iron.
Note The DSX 120 desoldering iron by Weller may only be operated
together with Weller WR 3M, WR 2 supply units.
4.2
Technical data
Temperature range 100°C - 450°C (212°F - 850°F)
Tool cable Silicone rubber, heat resistant
Heating element Integrated heating wire element
Temperature sensor Platinum sensor
Heating output 120 W
Voltage (heater) 24 V
Heat-up time (approx.) 35s (50°C to 350°C)
(120°F to 660°F)
Connection 6 pin connector, polarity protected with lock
Weight 104 g incl. tip and cable
Suction nozzle type
Supply unit XDS Series
Weller WR 3M, WR 2 stations