22
GB
Message/symptom
Possible cause
Remedial measures
Extraction power missing
Pipe system leaking
Reseal the pipe system
Filter is dirty
change the filter
Turbine speed too low
Increase the speed setting
Loud extraction noises
Air speed through extraction-
arm is too high speed
Reduce the air speed (reduce
air quanitity)
Unit is not running
Thermally switched off
Leave the unit to cool down.
Switch on again after approx.
3 hours.
Filter display is not working
Minimum pressure hose was
not replaced after the filter
change
Reconnect the hose to the
filter
Sub-micron paricle becoming
dirty to quickly
Pre-filter has not been used
Use prefilter
Unable to detect USB medium
USB medium inserted too long
Do not leave USB medium
inserted for longer than 2
minutes. Remove USB
medium and switch unit off
and on again
Reset unit
Wrong USB medium > 100
mA
Remove USB medium!
Original declaration of conformity
Extraction unit
Laser Line 200V
Laser
Line
400V
We hereby declare that the products described herein comply with the following guidelines:
2011/65/EU (RoHS), 2014/30/EU, 2006/42/EG
Applied harmonised standards:
EN 55 014-1: 2012-05
EN 60 335-1: 2012-10
EN 55 014-2: 2009-06
EN 60 335-2-45: 2012-08
EN 61 000-3-2: 2010-03/2011-06
EN 62233: 2008-11/2009-04
EN 61 000-3-3: 2014-03
EN 50 581: 2013-02
Besigheim, 2016-02-17
T. Fischer
B.Frühwald
Technical director
Managing director
Authorised to compile technical documentation.
Weller Tools GmbH
Carl-Benz-Straße 2, 74354 Besigheim, Germany
Error messages and error clearance
16-02-17_LaserLine_2-2.indd 22
17.02.16 13:49
