- 8 -
4.1 Állitsa az invertert ON/ OFF, BE/KI pozícióba
A hálózathoz való csatlakozás nélkül, nyomja meg a "ON/BE" gombot 3
másodpercig, engedje el, amíg a riasztó hangjelzést ad, az inverter elindul. Az
inverter működési folyamata során nyomja meg az "OFF/KI" gombot 3
másodpercig, engedje el, amíg az a hangjelzést ad, az inverter kikapcsol.
Amikor az inverter hálózati / AC módban működik, nyomja meg és tartsa az
"OFF/KI" gombot 3 másodpercig, engedje el, amíg a riasztó hangjelzést ad,
az inverter bypass módba áll.
Amikor az inverter bypass módban működik, nyomja meg és tartsa az
"ON/BE" gombot 3 másodpercig, engedje el, amíg a riasztó hangjelzést ad,
az inverter AC üzemmódba áll.
4.2 A kijelző interfésze
Inverter mód
Hálózati teljesítmény üzemmód
4.3 Beállítások
4.3.1 Beállítási műveletek
Normál üzemmódban nyomja meg egyszerre a "BE/ON" + "KI/OFF" gombot
és tartsa 3 másodpercig, hogy a Beállítás módba lépjen.
A Beállítás módban nyomja meg egyszerre a "BE/ON" + "KI/OFF" gombot
és tartsa 3 másodpercig, hogy a Beállítás módból kilépjen, a beállításokat
nem fogja menteni.
A Beállítás módban a lapozáshoz nyomja meg az "ON/BE" gombot, hogy
kiválassza a beállítási lehetõségeket.
Töltés
Akkumulátor kapacitás
Inverter kimeneti fesz
ü
lts
é
g
Ventilátor kilengése
Inverter kimeneti frekvencia
Bemeneti feszültség
Kimeneti fesz
ü
lts
é
g
Summary of Contents for UPS-HEATST-COMMANDER1000W-WL
Page 42: ......
Page 43: ...P N E 51 0000430 00 ...