②
Drill proper holes in the wall, plug up the screw holes with silicone caps.
Fasten the rain cover on the wall with screws.
③
.Unscrew from the topand the bottom of the outdoor unit, hold the panel and press the button part to
take off the metal cover. Take the name plate
out and write the name on the paper. Fix the name plate and metal cover back. Screw the panel
well with a screw driver.
④
.Refer to the wiring diagram to do the wire connection.
⑤
.Fix the outdoor unit on the rain cover with screws .
Bracket
System installation
A. Indoor unit
①
Fasten the bracket on the wall with screws.
②
Hang the unit on the bracket after finishing the connection. Plug the two ends
of the jack of the power adapter into the sockets of AC power and the unit separately .
B. Outdoor unit
①
Fix the unit 1.4m
– 1.7m high from the ground )according to the camera efect) to avoid direct sunshine.