The gases and fumes are hazardous to health, please wear personal protective equipment according to
regulations
•
Wear exhaust equipment and respiratory protective equipment to prevent gas poisoning or choke.
•
Use suggested exhaust ventilation system and respiratory protective equipment to prevent injuries or
poisoning by gas or dust.
•
To prevent oxygen deficiency, air out the gas filled space full of CO2 and argon on the bottom, when
operating in trunks, boilers, cabins, etc.
•
Request a supervisor's inspection when operating in confined spaces. Air the room and wear respiratory
protective equipment.
•
Never operate in degreasing, washing or spraying spaces.
•
Use respiratory protective equipment while welding armored steel, as this produces poisonous dust and
gases.
The welding arc, sparks, residues and noise are hazardous to health, please wear personal protective
equipment
•
Eye protection against welding arc is recommended when welding or supervising welding.
•
Please wear safety googles.
•
Welder's gloves, welder's goggles, long sleeve clothes, leather apron, and other standard personal
protective equipment must be worn during the welding operation.
•
A screen to protect other people against the welding arc must be set in the welding area.
WARNING
WARNING
Please observe the following notes to avoid toppling or breaking the gas cylinder
•
Use the gas cylinder correctly.
•
Use the built-in or recommended gas regulator.
•
Read the manual of the gas regulator carefully before using it, and pay attention to the safety notes.
•
Secure the gas cylinder with appropriate holder and other related parts.
•
Never expose the cylinder to high temperature or direct sunlight.
•
Keep your face away from the gas cylinder’s valve when opening it.
•
Put on the cap when the cylinder is not in use.
•
Never put the welding torch on the gas cylinder. The electrode must not touch the gas cylinder.
WARNING
Any contact with the rotating parts will cause injury. Please note the following:
•
Never use the machine when the enclosure is off.
•
The installation, operation, inspection and maintenance of the equipment must be carried out by authorized
personnel.
•
Keep fingers, hair, clothes etc. away from moving parts, such as the fan.
WARNING
The end of the wire may cause personal injuries. Please note the following:
•
Never look into the conduction hole when checking if the wire feed is normal, as wire shooting out may stab
your eyes and face.
•
Keep your eyes, face or other uncovered body parts away from the end of the welding torch when feeding
the wire manually or when pressing the switch.
WARNING
6
