4
CONTROLS EXPLAINED
4.1
Weld Process Selection
1.
Press and hold the ‘Top Selection Knob’ (21) until the current Welding Process Indicator Lights
(24) beings flashing.
2.
Rotate the ‘Bottom Selection Knob’ (22) until the desired Welding Process Indicator Light (24) is
flashing.
Figure 8
3.
Press the ‘Top Selection Knob’ (21) to select the process.
4.1.1
MIG Process:
In Manual MIG mode (MAN)
– the ‘Top Selection Knob’ (21) adjusts wire speed and the ‘Bottom
Selection Knob’ (22) adjusts the voltage.
In Synergic (Auto) MIG mode (SYN)
– the ‘Top Selection Knob’ (21) adjusts material thickness and the
‘Bottom Selection Knob’ (22) adjusts the inductance.
4.1.2
Stick (MMA) & TIG Process:
The ‘Top Selection Knob’ (21) amperage and the ‘Bottom Selection Knob’ (22) is disabled.
Figure 7
3 sec
Summary of Contents for WC-210MST
