USING THE WAM PC
Page | 22
WAM PC Status Indicators
The WAM PC gives its current status through a combination of LED and audible signals:
LED
Audible Signal
WAM PC Status
Off
-
Powered off.
Flashing Orange
-
It is ready to acquire new waveforms, but the
software application must load patient
demographics first.
Flashing Orange and Green
-
Ready to acquire new waveforms, but one or
more lead wires is not properly connected to
the patient.
Solid Orange
-
Ready to acquire new waveforms, and all
leads wires are connected to the patient.
Flashing Green
-
Acquiring new waveforms into memory.
Flashing Green
2 ticks per second
Acquiring new waveforms into memory, but a
lead wire has become disconnected.
Solid Green
-
Waveforms have been stored in memory. It
is not ready to acquire new waveforms.
Off
1 tick per second
The waveforms are being wirelessly copied
from memory.
Off
2 beeps per second
The stored waveforms are being erased from
memory.
Any
3 short beeps every
15 seconds
The battery level is low and a fresh battery is
needed.
AUDIBLE ACKNOWLEDGEMENTS
The WAM PC acknowledges certain actions with audible signals:
Action
Audible Signal
Powering on
1 short beep (for duration of button press)
Powering off
1 long beep
Powering off due to low battery
2 short beeps followed by 1 long beep
Starting acquisition
1 short beep
