Welch Allyn SCANTEAM 3210 Series, Operating Manual And Programming Menu

Page: 36 / 145

3–7 Additional Programming
Bar Code Prefix Example
To program a line feed prefix for UPC–A symbology only,
scan the following bar codes:
➊
ENTER (Prefix Selection)
➋
Assign ASCII Character Prefix
➌
6, 3 (on Symbology Bar Code chart)
➍
0, A (on ASCII Bar Code chart)
➎
F, F (on ASCII Bar Code chart)
➏
EXIT (Prefix Selection)
“ENTER (Prefix Selection)” bar code enters programming mode.
Where the:
“Assign ASCII Character Prefix” bar code starts assigning an ASCII
character prefix.
“6” and “3” bar codes specify UPC symbology (see Symbology Chart).
“0” and “A” bar codes specify Line Feed (see Hex– ASCII Chart).
“F” and “F” bar codes save the prefix assignment.
“EXIT (Prefix Selection)” bar code exits programming mode.
Bar Code Suffix Example
To program a carriage return suffix for
ALL symbologies,
scan the following bar codes:
➊
ENTER (Suffix Selection)
➋
Assign ASCII Character Suffix
➌
9, 9 (on Symbology Bar Code chart)
➍
0, D (on ASCII Bar Code chart)
➎
F, F (on ASCII Bar Code chart)
➏
EXIT (Suffix Selection)
“ENTER (Suffix Selection)” bar code enters programming mode.
Where the:
“Assign ASCII Character Suffix” bar code starts assigning an ASCII
character suffix.
“9” and “9” bar codes specify All symbologies (see Symbology Chart).
“0” and “D” bar codes specify Carriage Return (see Hex– ASCII Chart).
“F” and “F” bar codes save the suffix assignment.
“EXIT (Suffix Selection)” bar code exits programming mode.