Welch Allyn CP 200, Directions For Use Manual

Page: 47 / 92

Directions for Use Chapter 4 Performing Spirometry Tests 43
Working With a Completed Test
If you are looking at the Test Results main screen, shown here, you arrived here in either
of two ways:
• You pressed Test Done after completing a set of efforts ( Step 13 on page 42).
• You pressed Review Test to recall a saved test for review ( Step 5 on page 40).
Figure 30. “Test Results” Main Screen
You are now ready to work with the completed test. Press the desired softkeys:
When finished, determine what to do next.
• Press to start another test for this patient or another patient.
Go to Step 3 on page 39.
• Press to exit spirometry mode.
Softkey Function
Effort Type Alternates between FVC and SVC efforts, if applicable.
View Results See “To View a Test’s Results” on page 44.
Add/Edit Interp See “To Change a Test’s Interpretation Statements” on page 45.
Send Test See “To Send a Test to a Memory Card or Workstation” on page 46.
Print Test See “To Print a Test” on page 47.
33
2
4
1
Test Results
9:17AM Oct 16 08
Doe, Jane
View
Results
Print
Test
Add/Edit
Interps
Send
Test
Legend
Vol (L)
5
Time (s)
FVC example (vol/time curve)
Effort Type
FVC
All FVC curves, including any pre- and post-efforts,
are displayed on one graph. Any SVC curves are
displayed in a separate graph.