Welch Allyn 5002 Series, Service Manual

Page: 129 / 136

129
50 039301W 1 HANDLE MAST GRAY
51 039302W 2 PIN ALIGNER MAST HANDLE
52 30374 2 WASHER, 0.318" ID X 0.738" OD X 0.062 TK
53 33004 2 WSH, 1/4 STEEL SPLIT LOCK
54 25066 2 BOLT. 1/4-20 X 1" HEX HEAD, SS
55 726603 1 HARNESS, INTERIOR, MAST, COMMON, SCALE-T
56 412432 1 HARNESS, POWER JACK, DC, 2-5MM, SCALE-T
57 726494 2 SCREW, 1-32 X 3/8", RH, TORX, THREADFORM
58 726616 1 BRACKET, MAST, BATT HLD, SCALE-T
59 412431 1 HARNESS, BATT HOLDER, W/GRD, SCALE-T
60 24014 6 SCW, 6-32 X 1/4 " PHIL PAN STEEL NICKEL
61 130204 4 SCW, 6-32 X 1/4" FHMS UNDERCUT, ZINC
62 749201 6 "D" CELL BATTERY
63 1 SEE BATTERY ACCESS PANEL Table 1, identifier 6
64 130237 2 SCW, 10-32 X 3/8" PHIL RND MS, SS
65 726609 1 PLATE, PRINTER HOLDER, MAST, SCALE-T
66 726610 1 PRINTER, MECH, MARTELL, SCALE-T
67 726555 1 BRACKET, USB PCBA, SCALE-T
68 412273 1 PCBA, USB, SCALE-T
69 727161 2 SCW, 3-24 X 1/4, PHILLIPS, PHP PLASTITE
70 726746 2 SCREW, 6-32X7/16", HEX RHS, ZINC STEEL
71 726611 1 COVER, MAST, READOUT PANEL, SCALE-T
72 412270 1 PCBA, DISPLAY, W/TACT-SWITCH, SCALE-T
73 726601 1 OVERLAY, GRAPHIC, MAST, WPRINT, SCALE-T
74 132074 2 WASHER, 3/8" ID X 1" ODSS
75 130234 2 BOLT 3/8-16 X 3 3/4" HEX HEAD
76 726600 1 MAST CASE, HIGH, WO PRINTER, SCALE-T
77 726499 1 MAST CASE, HIGH, W/O PNT W/O AC, SCALE-T
78 726602 1 OVERLAY, GRAPHIC, MAST, WOPRINT, SCALE-T
79 727162 10 ADHESIVE BACKED, LATCHING, WIRE CLIP
80 715822 4 CABLE TIE HOLDER WITH ADHESIVE
81 113P464 4 CABLE TIE, 6 INCH
82 727306 1 HARNESS, CONT, GND, SCALE-T
83 412430 1 HARNESS, USB INTERFACE, SCALE-T
84 412467 1 HARNESS, DATA, DISPLAY PCB TO PRINTER
85 412468 1 HARNESS, POWER, DISPLAY PCB TO PRINTER
86 726551 1 POWER SUPPLY, EXT, 12VDC