AFTER SALES SUPPORT
1 866 558 8096
MODEL: 1271-15 PRODUCT CODE: 1271 07/2015
5
Bath & Shower Chair
Assembly
This Bath & Shower Chair can be used either with
or without the backrest, depending on your needs
and comfort level.
Seat & Frame Assembly:
1. Locate leg frame (A), leg frame (B), seat (C)
and one of the short screw knobs (H).
2. Place seat facing down on a flat,
dry surface.
3. Place leg frames in “X” pattern over the under-
side of the seat by matching up the A & B on
the leg frame with the A & B on the underside
of the seat as shown below. Leg frame (B)
must be under leg frame (A) (fig.1).
4. Fasten legs to seat by inserting shortest
screw knob through center holes of leg
frames and seat and turning screw knob
clockwise until tight.
A
B
A
B
Short
Screw
Knob
(H)
Fig. 1
A
B
Do not
over-tighten
screw knobs.
