Welbilt Manitowoc R, Technician'S Handbook, Page: 31 / 288

Part Number 000007661 Rev01 05/17 31
Step 7 Move the toggle switch to the ON position.
The ice machine will make ice with the cleaning solution
and deposit the ice in the bin. Add the remaining cleaner/
water solution as the water level in the reservoir drops.
NOTE: Do not allow the cleaner/water level to drop
below the minimum water level. The ice machine will
discontinue the cleaning cycle if the water float switch
opens.
Step 8 After all of the cleaner/water solution has been
added turn on the ice making water supply. Continue
the freeze cycle for 10 minutes to remove the cleaning
solution from the water circuit.
Step 9 Place the toggle switch in the OFF position.
Step 10 Refer to disassembly for cleaning/sanitizing
and remove parts for hand cleaning/sanitizing.
• Hand clean all parts
• Rinse all parts with clear potable water
• Sanitize all parts - do not rinse after sanitizing
• Spray all interior bin surfaces with sanitizer (do not
rinse sanitized areas).
• Spray evaporator discharge spout
Step 11 Reassemble ice machine.
Step 12 Turn off the ice making water supply.