30
Original instructions.
· Programming the coffee / tea dosage
This section explains how to program the doses dispensed automatically by the drink buttons.
· User menu – Access & browsing
To access the user programming settings, follow the steps below:
1. Hold down K5 for 8 seconds, until
[SEL]
message is shown on the display and K5 flashes.
(Programming dosages)
2. Hold down K5 for 8 seconds again, until
[t0]
(1
st
menu setting) is shown on the display.
3. Browse through the menu by pressing K1 & K2.
4. Access to each setting by pressing K5. The adjustable parameter will flash. Accept and save by
pressing K5 again.
5. To exit from the menu, browse to
[ESc]
(Escape) and press K5.
· User menu – Settings summary chart
Important:
Use a portafilter filled with fresh coffee for every new dose you program.
On machines equipped with a display:
1. Hold down K5 for 8 seconds, until
[SEL]
message is shown on the display and K5 flashes.
2. Press the dispensing option that you wish to program: Short Espresso (K1), Medium Espresso
(K2), Long Espresso (K3) and Flush (K4). The light on the button pressed and K5 button will
remain on. The group will start dispensing coffee.
3. When the desired volume is reached in the cup, press the selected button again to stop
dispensing. This volume setting will be saved.
Repeat this process for all the dispensing options that you wish to reprogram.
If you only need to reprogram one of the dispensing options, follow the steps above and program
just that option. All the other dispensing options will remain unchanged (default settings).
To come back to home screen, wait 30 seconds or turn the machine off and on again.
i
Note:
Programming any of the options on the left-hand Drink buttons (when viewing the
machine from the front) automatically sets the dispensing volumes on all of the other
Drink buttons. This only applies to the left-hand Drink buttons. Programming other
Drink buttons only modifies the option selected.
Group flush button (K4) can be programmed as an standard drink if desired.
If K5 is enabled as Tea button, the automatic hot water dosage can be programmed by
time on K5. This dosage will be independent on each group.
Setting
Description
[ t0]
Boiler temperature
[cro]
Chrono setting (shot timer)
[PiX]*
Preinfusion (Gr1, Gr2 & Gr3)
[Eco]*
Eco mode timer
[Std]*
Eco mode stand-by timer
Setting
Description
[SLc]
Service liter counter (water filter)
[Scc]
Service coffee counter (maintenance)
[tot]
Total counters
[cLo]
Clock settings
[AUt]*
Auto on/off function
* Disabled by default on service menu
USER PROGRAMMING - DISPLAY PID VERSIONS
