20
Original instructions.
INSTALLATION AND START UP
· Machine positioning
MIN. 10 cm
MIN. 30 cm
Install within 0-3º horizontal.
1.
Installing the machine in the service area must be performed by a qualified person. As the
machine may be quite heavy, at least two strong, capable individuals are recommend to
work together to lift and position the machine. Consult the Technical Specifications page
for the specific machine model being installed for machine weight and dimensions details.
Contact a service technician to do this task if you are not confident about performing the
steps below.
2. Position the machine on a level, sturdy, and water-resistant surface approximately 110cm
above floor level for ease of access and usage.
3.
Adjust the feet to ensure that it dispenses coffee evenly to all cups.
4. Ensure enough free space is available above (>30cm) and behind (>10cm) the machine to
ensure easy cleaning and maintenance and adequate ventilation.
Important:
Leave an air gap of at least 30cm above the machine and 10cm behind it to ensure adequate
ventilation. The machine must be installed within 3º of horizontally level front-to-back and
side-to-side to ensure proper hydraulic function and drainage. Confirm with a spirit level or
digital angle gauge.
Do not install the machine if the machine or installation surface it is wet. Allow it to dry
completely and ask a service technician to ensure that none of the electrical components
have been affected.
