Installation and operating instruction
Oil burner WL5/1-B
9 Servicing
83272002 1/2019-04 La
39-76
9.5 Set ignition electrodes
Observe notes on servicing [ch. 9.1].
The ignition electrodes must not touch the nozzle's atomising cone.
Place burner into service position A [ch. 9.3].
Check distance of ignition electrodes.
If necessary adjust ignition electrodes by slightly bending.
2.0 ... 2.5 mm
1.0 ... 2.0 mm
1.5...2.0 mm
9.6 Removing the mixing head
Observe notes on servicing [ch. 9.1].
Unplug ignition cable
1
.
Remove flame sensor
5
.
Remove oil line
3
.
Remove screws
2
Undo screws
4
.
Remove mixing head.
3
5
1
2
4