·７·
2. Installation:
The input power supply of this series of welding machine is 1- phase AC 230V±10%
，
50/60Hz. The
switchboard with circuit breaker is needed. Connect the ground cable firmly.
3.
Machine Assembling Guide:
(1)
Connect the welding cable firmly.
(2)
Turn on the power switch of the welding machine.
(3)
Connect the input 1 phase power supply cable with the switchboard, switch on.
Attention: Cut off the power supply before connecting the welding cable. Put the plug into the socket,
and then turn it clockwise to ensure good connection between the plug and socket
