28
Maximum Connect Count
Three cMT
-
Viewer clients are allowed to remotely view and control the project of a cMT
-
SVR simultaneously
by default. When the fourth cMT
-
Viewer client connects to the cMT
-
SVR, the warning message as shown
below will pop up and reject the connection.
The maximum capacity can be adjusted in Easybuilder pro software. Here are the steps.
1. Launch Easybuilder pro v6.01.01 or greater.
2. Go to the [Home] tab » [System Parameters].
3. Click on the [Remote] tab.
4. Within cMT
-
Viewer, set up the number of cMT
-
Viewer max connections. Up to 10 cMT
-
Viewer clients
are allowed to connect to one cMT
-
SVR.
Warning: Allowing a number of cMT-Viewer connections up to 4 or over will affect HMI
performance. Please take this into consideration when programming projects.
