Sottezza II Stretch/ LED/ Sottezza II OptiStretch/ LED
Version/ Versie 1
13.01.2021
Seite
Technische Änderungen vorbehalten/ Technische wijzigingen voorbehouden/
Artikelnummer/ Item
Bladzijde
We reserve the right to make technical changes/ Sous réserve de modifications techniques
Number/ Numéro d’article 127266-0000 Page 29/55
3
Changing the fabric (GB)
Electrical hazards
Read and follow the instructions and in particular the safety instructions in the
assembly instructions and the maintenance instructions and directions for use.
Physical injury may result from tensioned parts
Read and follow the instructions and in particular the safety instructions in the
assembly instructions and the maintenance instructions and directions for use.
Visual inspection, assessment and replacement of adjacent components
When changing the fabric, also pay attention to other adjacent components such as
ropes, rope drums, the drive, pulley blocks etc. and replace them if necessary to avoid
consequential damage.
Careful handling of components
When changing the fabric, make sure you handle the fabric and the beading carefully
to avoid damage and soiling.
3.1 Preparatory work for changing the fabric, if the cassette is to be dismantled (weinor
recommendation)
Opening the projection profile
1. If distance ropes are assembled on the
system, they must be disassembled first.
2. Extend the conservatory awning
approx. 30 cm., if possible.
3. Disconnect from the power supply voltage.
4. Pull the 10x6.7 mm cover plugs out of the
drilled holes in the projection profile.
5. Remove the 4.2x16 filister-head self-tapping
screws and the projection profile cover.
Loosening the system
6. Loosen the tensioning rope's cable ties in
the projection profile
(A)
.
7. Undo the knots on the rope clamp
(B)
8. Push the braided sleeving to the side
(C)
.
9. Carefully loosen the rope clamp's M6
countersunk screw so that the system is
loosened
(D)
.
DANGER
DANGER
PLEASE NOTE
PLEASE NOTE
A
B
D
A
C
