Maintenance Instructions and Directions for Use
Item number 115024-0000
Subject to technical modifications
Version 4
12.07.2013
Page 13/14
PergoTex
6
Rectifying Faults
Only eliminate errors which can be rectified through maintenance and care. This includes, for
example, removing foreign bodies.
All other defects or malfunctions should only be repaired by your specialist retailer or partner.
Please bear in mind that faults which are not repaired properly will compromise the safety of
your awning system.
You should therefore call your specialist retailer immediately if a fault occurs. This person is your
local specialist and will gladly provide you with swift, professional advice. To help you
troubleshoot, a few errors are listed below.
6.1 Troubleshooting
Error Cause
Remedy
System
not
running
No power supply
Motor incorrectly connected
Motor is too hot and has
been shut down by the
thermo protector
Connect to the mains
Connect to the mains
(authorised personnel only)
Wait approx. 15 to 20
minutes until the motor has
cooled down
Squeaking
Bearing surfaces not
lubricated
Maintenance and care (fitter)
7 Retrofits
Your PergoTex can also be retrofitted with automatic controls, e.g. with sun and rain sensors.
For more details, contact your specialist retailer, who will be happy to advise you.
8
Noise Level
When installed, the noise level of the PergoTex has been measured at below 70 dB(A).
