Weinmann WM 23904, Instructions For Use Manual

Page: 38 / 72

38 EN Connecting lead PSG
WM
1625
0g 07/
2012
Connect PSG connecting lead
3.1.3 Analogbox D ⁄ A
1. Connect the Analogbox D ⁄ A to the therapy device.
2. Select the jack with the desired output signal on the
Analogbox D ⁄ A.
3. Plug the modular plug of the PSG connecting lead into the
selected jack of the Analogbox D ⁄ A.
3.2 Connect PSG
1. Select a suitable connecting lead for your PSG.
2. Connect the connecting lead with the appropriate plugs to the
PSG (see “1.1 Pre-assembled cables” on page 27).
Alternatively,
adapt the connecting lead individually to the PSG using the
universal cable.
PSG connecting lead
Assignment of the output signals of the therapy device to the jacks
of the Analogbox D
⁄ A can be found in the relevant instructions for
use for hospital staff, where you will also find information about
calibration data. You should also follow the instructions for use for
the Analogbox D
⁄ A.