8
EN
Assembly
4 Assembly
4.1 Assembly of wall mounting
If you would like to mount the case on the wall of a
vehicle, use wall mounting WM 15370 (see Section “9
Supply Schedule” on page 13).
If you would like to mount the case on the wall of a buil-
ding, use the appropriate wall mounting WM 15731 (see
Section “9 Supply Schedule” on page 13).
1. Mark the spots for the holes on the surface where you
want to fasten the case.
You can use the wall mounting as a stencil.
2. Drill the holes:
– in vehicles: with a drill bit of 3 mm in diameter
– in buildings: with an appropriate bit for the requi-
red dowel.
3. Screw the wall mounting tightly into place.
Wall mounting
WM 15370
Wall mounting
WM 15371
