16
EN
Technical Specifications
To replace the following inserts, it is necessary to disassem-
ble the entire outer casing.
To do this, you have to rebore the rivets for all the fittings
such as locks, hinges, etc.
After you have replaced the inserts, rivet the new fittings
into place with blind rivet pliers.
Insert, upper*
WM 15590
Insert, lower, variable*
WM 15591
* includes fastening elements
10 Technical Specifications
Emergency Case
Device category (93/42/EEC)
I
Standards met
E DIN 13232
EN 1789
Dimensions (LxBxH)
(outer measurements including projecting ends
such as case corners, footings, handle, etc.)
526 x 400 x 170 mm
Weight, empty
6.5 kg
Temperature range
- Operation
- Storage
20 °C to + 50 °C
- 30 °C to + 70° C
Material:
– Case shell
– Upper insert
– Lower Insert, variable
– Dividers
– Cover
anodised Al 1.5 mm thick
PS
ABS
ABS
PC
Subject to technical change without notice.
