Weinmann BiLevel-ST VENTImotion WM 24800, Service And Repair Instructions

Page: 7 / 64

Overview 7
5 Bar chart for pressure indicator
For graphical display of pressure.
6 Ventilation parameters
The relevant current ventilation parameters are displayed depending on the active
mode.
7 Active ventilation mode
The active ventilation mode is displayed at this point in the status line.
Symbols used in the display
Abbreviations used in the display
Symbol Significance
Status line:
Softstart active, remaining time faded in
Filter change required
Maintenance required
Acoustic signal for the IPAPmin and V
T
min alarms mute
Alarm for IPAPmin and V
T
min alarms deactivated
Physician functions enabled
Physician functions disabled
Fan off (with VENTI motion , only available from software version 6.0)
Main window
Low-priority alarm triggered
Medium-priority alarm triggered
Symbol Significance
Status line:
TA TA mode active (VENTI logic only)
S S mode active
ST ST mode active
T T mode active
SX SX mode active
SXX SXX mode active
CPAP CPAP mode active
+V
Volume compensation activated (follows mode: e.g. SXX +V )
A
A
Device in TA mode, automatic analysis phase in progress
(VENTI logic only)
A
M
Device in TA mode, manual analysis phase in progress
(VENTI logic only)
Main window (monitor)
IPAP Inspiration pressure
EPAP Expiration pressure
hPa Pressure shown in hectopascal; 1.01973 hPa correspond to 1 cm H
2
O