WEILOR WIS 322, Instructions For Use Manual

Page: 50 / 63

50
1. Touch the ON/OFF control, all the indicators
show “-“.
•
After power on, the buzzer beeps
once, all the indicators light up for
1 second then go out, indicating
thatthe ceramic hob has entered the
state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use ( - for example).
•
Make sure the bottom of the
pan and the surface. Of the
cooking zone are clean and dry.
3.Touch the sensor of the required heating zone
next to the zone, the indicator will flash.
4. Select the degree of heating using the slider
sensor.
•
To adjust the degree of heating, use the slider
sensor to move the slider from left to right.
•
If you don’t choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at step 1.
•
You can modify the heatsetting atany time
during cooking.
EN
USING THE HOB
The electric generator feeds the coil located
inside the equipment. This coil creates a
magnetic field and at the moment of placement
on the plate of the pot to it (pans) penetrates
the induction current.
This current turns the castel into a heat sensor,
while the glass-ceramic panel remains cold.
This system requires the use of pans, the
bottom of which reacts to the action of the
magnetic field.
Fan: designed to protect and cool control
elements. The fan can operate at two different
speeds, it works automatically. The fan operates
when the heating zones are switched on, and
also when the surface is turned off, in order
to achieve sufficient cooling of the electronic
system.
Transistor: the temperature of electronic
elements is continuously measured with the
help of a probe antenna. If the heat increases in
dangerous limits, this system will automatically
reduce the power of the heating field or turn
off the heating fields located near heated
electronic components.
Detector: a detector for the presence of a pan
including a plate, and thereby heating. Small
objects located in the heating zone (for example,
a spoon than ...), and will not be perceived.
Detector presence of the pan on the induction
field (Pan detect).
A pan presence detector built into the
surface has an induction field. When the hob
is in operation, the pan detection detector
automatically or starts or delays the heat
generation in the cooking area when the pan
is placed on the cooking zone, or when it is
removed from the surface. This saves energy.
By the end of cooking:
1. Turn off the hob completely using the ON /
OFF sensor (ON / OFF) .
2. If you want to turn off the heating area, touch
the long press of the selected area.
3. Turn off the hob by sliding the slider to the
left, reducing the mode to ”0”.
To start cooking Principles of the action of the
induction field
Turn off the cooking surface