上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
22
/
53
2
Basic Commissioning
Through this section, you can quickly know the following basic commissioning
processes for
NK300CX
:
1.
Switch the system configuration.
2.
3.
4.
5.
6.
2.1
Switch the System Configuration
This operation is used to check if the default system configuration is the desired one,
and change it according to the structure of the machine tool if it is not the desired
one when the system is installed at the first time.
At present,
NK300CX
supports the following configurations:
•
Three-axis configuration
•
Four-axis configuration
•
Five-axis configuration
To switch system configuration, do the following:
1.
To enter into
System
interface, press
→
1
.
2.
Press
F3
, enter the manufacturer password.
Configuration Manager
dialog
box pops up:
The current system configuration is in blue at the bottom of the dialog box.
