上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
30
/
36
Cylinder Offset(Y)
The distance between the tool and the height measurement sensor in Y-axis
direction.
Position Z
The machine coordinate of Z-axis before height measurement.
Speed
The moving speed of the measuring device when a height measurement signal
is detected.
3.
To start height measurement, select one of the following methods:
–
: manually measure height .
–
: the system automatically measures
height during cutting.
5.2.1
Manually Measure Height
To manually measure height, do the following:
1.
In
Height Measurement Mode
area, select
Manually
.
2.
In
Manual
mode, move the tool to the target position.
3.
Click
T1
/
T2
.
The system starts to measure height.
5.2.2
Measure Height before Cutting
To measure height before cutting, select
Before Machining
in
Height
Measurement Mode
area, and click
OK
.
The system automatically starts to measure height at the start point of the tool path.
If double tools are both active currently, the system measures height for both of
them at the same time.
5.3
Execute Jiggle
This operation is used to adjust height of the tool, so as to find the best cutting
height.
This operation cannot be executed in
Idle
status. Thus, before executing jiggle,
ensure the system is in
Run
or
Pause
status.
