background image

上海维宏电子科技股份有限公司

 

SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD

 

 

116

 / 

116

 

 

 

Legal Notices 

The term “Software Product” includes all copies of the licensed software and its 
documentation. This license agreement is a legal agreement between You (either an 
individual, a legal entity or any affiliated companies or other entities) and Weihong 
Electronic Technology Co., Ltd. (hereinafter referred to as Weihong Company). By 
installing, copying, or otherwise using the Software Product, you agree to be bound by the 
terms and conditions of this license. Unless otherwise stated in this agreement, you shall 
not use, copy, revise, rent, or transfer the Software Product or any part of the Software 
Product for any other purposes. 

Requirements of Use 

1.  You may install for use one copy of the Software Product on a single machine; 
2.  You may make a copy of the Software Product for archive or backup purposes and 

the copy is to be used on this machine only; 

3.  You may transfer the Software Product and the license agreement to a third party, 

provided that the third party accepts the terms and conditions stated in this 
agreement, with prior express permission from Weihong Company; 

4.  When transfer confirmed, you shall transfer all the copies of the original documents 

and the supplementary documents to the third party or destroy all the copies un-
transferred; 

5.  You can use the Software Product on a network server or intranet server only if it is 

stipulated in explicit terms that you are allowed to use the Software Product on a 
network server or intranet server, or you have purchased license for each node and 
terminal using the Software Product; 

6.  You may NOT sublicense, assign or transfer the license agreement; 
7.  You may NOT or direct any third party to reverse engineer, decompile or 

disassemble the Software Product; 

8.  You may NOT copy or transfer the Software Product or any part of the Software 

Product unless otherwise expressly stated in this agreement; 

9.  The license agreement shall be terminated automatically upon you transfer the 

Software Product or copies of all or part of the Software Product to a third party. 

Intellectual Property Rights Notice 

The Software Product and all intellectual property rights therein (including but not limited to 
any all copyrights, patents, trademarks, and publicity rights) are owned by Weihong 
Company. The Software Product is protected for Weihong Company on the basis of 
Chinese copyright law and international treaty provisions as well as on the basis of other 
laws and agreements regarding intellectual property. You are not allowed to remove the 
copyright statement made in the Software Product, and guarantee that you shall copy the 
copyright statement in all copies of the Software Product or of any part of the Software 
Product. You are obliged to stop any form of illegal copying of the Software Product and 
accompanying materials. 

Weihong Company can update the Software Product at any time. You can pay real-time 
attention to Weihong Company's official website. 

Termination 

This license may be terminated by Weihong Company at any time once you violate any 
terms or conditions made in this agreement. Once the license is terminated, you are 

Summary of Contents for LS6000M


























































































































Reviews: