Running the Toolpath
Prerequisite
Before you start automatic running the program, make sure the following:
•
All machine axes have returned to the machine origin.
•
CCD commissioning has been done.
•
Related parameters have been well set.
•
Toolpath has been imported into the system.
Steps
Turn to
Auto
mode, and click
Start
.
To sum up, an overall machining process goes like:
1.
Launch
NcStudio
system.
2.
Return all machine axes to the machine origin.
Is the first-time machining for the graphic?
–
Yes: turn to step 3
–
No: turn to step 7
3.
Turn to
NcEditor
interface, and import
.jpg
image file into
NcEditor
.
4.
Edit the toolpath and save it as
.nce
program file.
5.
Move to the shooting position and get marking points.
Are the marking points correct?
–
Yes: turn to
Manual
mode, move the camera center to any shooting
center, and click
Mark 1
,
Mark 2
,
Mark 3
in order.
–
No: turn to
Manual
mode, move the camera center to the actual position
corresponding to marking point 1, and click
Mark 1
; move the camera
center to the actual position corresponding to marking point 2, and click
Mark 2
; move the camera center to the actual position corresponding to
marking point 3, and click
Mark 3
.
6.
Click
CCD
→
Property
, and set image similarity.
7.
Move the camera center to specified workpiece origin in
NcEditor
and clear
coordinates to zero.
8.
Turn to
Auto
mode, and click
Start
.
WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
- 37 -
