Document No.: CWL-URM-04A
|
Revision No.: 00.
|
Revision Date: 20.06.2022
Document No.: CWL-URM-04A
|
Revision No.: 00.
|
Revision Date: 20.06.2022
27
28
25. Recommendation
Please note that the optimal intensity level varies from person to person.
For optimum result, please do not peel the electrode patches while the device is on.
Important
Store these electrode patches in cool areas with temperature under 30°C in a dry and
ventilated place. Avoid exposure to sunlight.
If these electrode patches get dry and lose their stickiness, then put a few drops of water on
them and rub them evenly and gently to rehydrate them.
Using the foot pads and electrode patches at the same time
If you want to use electrode patches and the foot pads at the same time:
Follow the steps for using the Foot Pads
Then follow the steps for using the Electrode Patches.
Important note
Selected program will be displayed every 5 mins for 10 seconds during the therapy in the
PROG/TIME display segment.
Information
The poly fuse has been used in the devices and that is resettable. We uses on board SMD
1812L150 LF150 Fuse
Note
Camex wellness Limited will make available on request circuit diagrams, component part
lists, descriptions, calibration instructions, or other information that will assist service person-
nel to repair those parts of the Circulator (Nerve & Muscle Stimulator) that are designed by
the Camex Wellness Limited as repairable by the service personnel.
26. Accuracy of Controls and Instruments
Device is to produce strong non-painful pulsating sensations, often accompanied by
muscle twitching. Suggests that currents with pulse amplitudes (mA) that generate a
strong, non-painful pulse sensation are critical for response and therefore pulse amplitude
should be titrated during treatment to maintain this intensity level last 1 to 85 in some
scenario above >85 its to be sensation are critical and may harm to user.
Intensity equation:
pulse_voltage_legs = ( 31V + INT_SETTING_LEGS) * 1.2;
pulse_voltage_pads = ( 21V + INT_SETTING_LEGS) * 1.2;
