Document No.: CWL-URM-04A
|
Revision No.: 00.
|
Revision Date: 20.06.2022
Document No.: CWL-URM-04A
|
Revision No.: 00.
|
Revision Date: 20.06.2022
25
26
Thoroughly wash the intended treatment site and then dry it properly.
Connect the electrode patches with the connecting wire. Now plug this
wire into the accessories socket on the device
Step 1
Ensure that the device is turned off when you are attaching the
electrode patches. Peel off the protective membrane from the
electrode patches and carefully place on the clean, dry, uninjured skin.
Step 2
Turn on the device through the power button of device
Step 3
Adjust the intensity through the 4+ button for body Adjust still your
comfort level.
Step 4
As the device is set on Auto Timer for 30 mins, post 30 mins the
device will automatically switch off.
Step 5
Carefully peel the electrode patches from the skin and place it
back on the protective membrane
Step 6
Please do not pull the electrode wires. They may get damaged.
Carefully remove the wire and restore the accessories.
Step 7
