Weidmüller APG 80, Instruction Manual, Page: 41 / 52

3. Operation
3.1 Start up of the equipment
Insert the battery (see illustration) and push until the safety switch clicks.
3.2 Instructions for the use of the power pack and battery charger
The battery charger has dimensions depending on the version for 230 and 120 Volt
50-60 Hz. The new batteries are provided partially charged and must be charged before
the machine is used for the first time. In order to recharge the battery charger plug must
be inserted in a wall socket and the power pack must be placed in the battery charger.
A 3 Ah power pack can be recharged in approximately 60 minutes. The status of the
charge for the power pack is indicated by the luminous diode on the battery charger.
CAUTION
When the power pack is not being used keep it away from paper clips,
coins, keys, nails, screws and other small metal objects which could act
as contact bridges. A short circuit between the battery contacts could
cause combustion or fires.
Do not charge the power pack in the presence of easily inflammable gas
or materials. After charging, remove the battery charger plug from the wall
socket. Do not disassemble the battery charger.
If the power packs are stored for long periods of time, their charge status
must be checked periodically. The optimum charge is between 50% and
80%. The power packs should be recharged every 12 months at most to
avoid complete discharge which could cause damage.
Discharged power packs should not be stored for periods of more than
one month to avoid their complete depletion which could destroy the
battery.
Use only the battery charger advised by the manufacturer. The use of a
battery charger suitable for a specific type of battery to recharge other
batteries are a cause of danger of fire.
Operation
41 1548610000/00/09.14