Weidmuller PrintJet PRO, Manual

Page: 28 / 106

Initial commissioning
28 5661290000/00/06.08
4.3.1 Inserting the output rail
Insert the output rail so that it snaps into position.
Figure 17 Inserting the output rail
NOTE
Run through the commissioning proce-
dure as detailed in the instructions be-
fore turning on the printer!
4.3.2 Inserting the ink cartridges
CAUTION!
The ink cartridges are sealed units. Un-
der normal circumstances, ink will not
leak out of an ink cartridge.
If you get ink on your hands, wash them
thoroughly with soap and water. If you
get ink in your eyes, rinse immediately
with plenty of water.
Handling ink cartridges
•
Store unopened ink cartridges in a cool and dry
place, preferably in a refrigerator at 4°C.
•
Before using an ink cartridge that has been stored
in a colder place, allow the cartridge to acclimatize
to the room temperature for at least three hours.
•
Install ink cartridges immediately after removing
from the packaging. The print quality can be im-
paired if an ink cartridge is left unpacked for a
length of time before use.
•
Keep ink cartridges out of reach of children. Never
allow ink cartridges to fall into the hands of chil-
dren. Never allow children to drink from them.
•
Always handle used ink cartridges with care, be-
cause a small amount of ink could remain in the
ink supply outlet. If you get ink on your skin, wash
it thoroughly with soap and water.
•
Do not shake ink cartridges, as this can cause ink
to leak.
•
Do not use ink cartridges beyond the expiration
date printed on the cartridge packaging. For best
results, the ink in the cartridge should be used
within six months of installation.
•
Do not take apart or try to refill ink cartridges. This
could result in damage to the print head.
•
Ink is used each time a new ink cartridge is in-
serted or the ink cartridge cover is opened, as the
PrintJet PRO always carries out a reliability check
in each case.
•
Always handle ink cartridges with care, otherwise
ink could spill and cause contamination.
•
Never touch the ink supply outlet of the ink car-
tridge or the area around it.
•
Please note that it is possible that the ink car-
tridges could fall out of the carrier.
Click!