Weidmuller PrintJet PRO, Manual, Page: 27 / 106

Initial commissioning
5661290000/00/06.08 27
4.2 Included in delivery
After you have taken the PrintJet PRO and all ac-
cessories from the packaging, make sure that you
have all of the following parts:
•
PrintJet PRO printer
•
Power cord
•
USB cable
•
Quick Installation Guide
•
Printer driver and software CD (M-Print
®
PRO,
driver, manuals …)
•
MultiCard markers: 2 cards DEK 5/5 MC
•
4 ink-cartridge carriers
•
Output rail
The delivery does
not include:
•
LAN cable
•
Ink cartridges:
Variant 1:
black starter kit, order number:
1027090000
Variant 2:
colour starter kit, order number:
1027110000
NOTE
Run through the commissioning proce-
dure as detailed in the instructions be-
fore turning on the printer!
4.3 Setup
Select a suitable location for the setup, considering
the following factors:
•
Place the PrintJet PRO on a flat, stable surface
larger than the base area of the printer.
•
The PrintJet PRO will not operate properly if it is
tilted or at an angle.
•
Ensure there is sufficient space to allow the Multi-
Cards to be ejected without hindrance from the
PrintJet PRO.
•
Avoid installing the PrintJet PRO in any location
where it is subject to rapid changes in temperature
and humidity.
•
Ensure that the PrintJet PRO is not exposed to di-
rect sunlight, strong light or excessive heat.
•
Avoid locations subject to impact shocks or vibra-
tions. Do not place on a table joined to other tables
to avoid the transmission of vibration.
•
Do not install the device in dust-filled surround-
ings.
•
When installing, ensure that the PrintJet PRO is
sufficiently ventilated on all sides.
•
Install the PrintJet PRO near a socket outlet, en-
suring that the plug can be easily removed at all
times.
Dimensions of the printer system (including the out-
put rail)
L x W x H, approx. 1270 x 500 x 300 mm.
Weight: approx. 32 kg
NOTE
Observe recommended minimum dis-
tance! Install the printer on a freely ac-
cessible, sturdy, level surface.