Weider WESY1938C.0, User Manual, Page: 10 / 28

10
7. Orient the Top Frame (4) so that the welded
support (E) is on the bottom.
Attach the Top Frame (4) to the Upright (3) with
two M8 x 65mm Bolts (68), two M8 Washers (59),
and two M8 Locknuts (58); do not tighten the
Locknuts yet.
Then, attach the Top Frame (4) between the
Weight Guides (21) with an M10 x 155mm Bolt
(74), two M10 Washers (57), two 19mm Spacers
(76), and an M10 Locknut (56).
See steps 3, 4, 5, and 7. Tighten the M8
Locknuts (58).
8. Grease an M10 x 77mm Bolt (79). Orient the Leg
Lever (8) so that the welded support (F) is on the
side shown. Attach the Leg Lever to the Front Leg
(7) with the Bolt and an M10 Locknut (56). Do not
overtighten the Locknut; the Leg Lever must
pivot easily.
9. Grease an M10 x 77mm Bolt (79). Attach the Pivot
Frame (5) to the Top Frame (4) with the Bolt and
an M10 Locknut (56). Do not overtighten the
Locknut; the Pivot Frame must pivot easily.
Next, attach the two Arm Pins (40) to the Pivot
Frame (5) with two M4 x 20mm Self-tapping
Screws (69). Insert the Arm Pins into the two holes
(G) in the Upright (3).
Arm Assembly
Grease
G
5
56
79
69
69
3
40
40
4
9
56
79
Grease
F
7
8
8
4
E
3
58
56
74
21
21
59
57
57
59
76
68
58
7