22
62. Wrap the Press Cable (69) under a 90mm Pulley
(39). Attach the Pulley, two M10 Washers (116),
and two Half Finger Guards (42) to the Left Base
(2) with an M10 x 52mm Bolt (102) and an M10
Nylon Locknut (114).
62
2
42
42
69
114
116
116
102
39
63. Attach the end of the Leg Press Cable (69) to the
“U”-bracket (50) with an M8 Washer (117) and an
M8 Nylon Locknut (115).
Note: Do not complete-
ly tighten the Locknut; it should be tightened
so that only two threads of the Cable show
past the Locknut, as shown in the inset draw-
ing.
65. Attach the Right Backrest (28) to the Right
Upright (4) with four M6 x 16mm Screws (85).
64. Attach the Seat (29) with the serial number decal
on the bottom to the Right Seat Frame (9) with
four M6 x 16mm Screws (85).
Repeat this step with the other Seat (29) and
the Left Seat Frame (not shown).
63
69
50
29
85
9
85
115
117
64
65
4
85
28
85
50
115
Seat Assembly
Summary of Contents for Pro 8000
Page 35: ...35 NOTES...
