Weider Pro 8000, Manual

Page: 21 / 44

21
57. Wrap the Press Cable (69) under a “V”-pulley
(40). Attach the “V”-pulley, two Half Finger Guards
(42), and two M10 Washers (116) to the Leg
Press Frame (12) with an M10 x 118mm Bolt
(100), an M10 Washer (116), and an M10 Nylon
Locknut (114).
57
116
116
116
100
114
12
40
69
42
42
58. Wrap the Press Cable (69) under a 90mm Pulley
(39). Attach the Pulley, two Half Finger Guards
(42), a Small Cable Trap (48), and an M10
Washer (116) to the Left Upright (5) with an M10
x 108mm Bolt (99), an M10 Washer (116), and an
M10 Nylon Locknut (114). Make sure the Cable
Trap is oriented to hold the Cable in the
groove of the Pulley.
59. Wrap the Press Cable (69) under a 90mm Pulley
(39). Attach the Pulley, two Half Finger Guards
(42), a Small Cable Trap (48), and an M10
Washer (116) to the Press Frame (13) with an
M10 x 135mm Bolt (98). Make sure the Cable
Trap is oriented to hold the Cable in the
groove of the Pulley.
60. Wrap the Press Cable (69) around a “V”-pulley
(40). Attach the “V”-pulley, two Half Finger Guards
(42), a Cable Trap (49), and an M10 Washer
(116) to the Left Upright (5) with an M10 x 68mm
Bolt (93) and an M10 Nylon Locknut (114). Make
sure the Cable Trap is oriented to hold the
Cable in the groove of the Pulley.
61. Wrap the Press Cable (69) around a 90mm
Pulley (39). Attach the Pulley, two Half Finger
Guards (42), a Small Cable Trap (48), and an
M10 Washer (116) to the Press Frame (13) with
the M10 x 135mm Bolt (98) used in step 59 and
an M10 Nylon Locknut (114). Make sure the
Cable Trap is oriented to hold the Cable in the
groove of the Pulley.
58
99
5
42
69 39
48
42
116
116
114
59
42
98
42
48
39
69
13
116
60
42
42
5
40
49
114
69
93
116
61
98
13
42
42
48
114
39
116
69