background image

3

1.

Read all instructions in this manual before
using the weight bench. Use the weight
bench only as described in this manual. 

2.

It is the responsibility of the owner to ensure
that all users of the weight bench are ade-
quately informed of all precautions.

3.

The weight bench is intended for home use
only. Do not use the weight bench in any
commercial, rental or institutional setting.

4.

Use the weight bench only on a level surface.
Cover the floor beneath the weight bench for
protection.

5.   Inspect and tighten all parts each time you

use the weight bench. Replace any worn
parts immediately. 

6.   Keep children under 12 and pets away from

the weight bench at all times.

7.  Keep hands and feet away from moving parts.

8.

Always wear athletic shoes for foot protec-
tion while exercising.

9.

Do not use a barbell longer than six feet with
this weight bench.

10. Always make sure there is an equal amount

of weight on each side of your barbell.

11. The weight bench is designed to support a

maximum of 460 pounds, including the user,
a barbell and weights. Do not place more
than 210 pounds, including a barbell and
weights, on the weight rests. Do not place
more than 130 pounds on the weight carriage.
Do not place more than 130 pounds on the
leg lever for normal use. 

12. Always place 50 pounds on the leg lever to

balance the bench when performing squat
exercises (see page 14).

13. Always fold the backrest out of the way when

performing squat exercises (see page 15). Do
not sit on the seat when the backrest is folded.

14. Do not stand with your back to the weight

bench when performing squat exercises (see
page 15). You should be able to see the
weight rests while exercising so that you can
safely return the barbell to the weight rests
when you finish the exercise.

15. When using the backrest, make sure the

adjustment tube is fully inserted into the
adjustment brackets on the uprights.

16. Always remove the lat tower or curl post

from the front leg before performing leg curl
or leg extension exercises with the leg lever
(see page 14).

17. When performing an exercise during which

you are sitting on the bench with your back
to the lat tower, make sure there is plenty of
space between your back and the weight car-
riage. Always lower the weight carriage in a
controlled manner. Never let the weight car-
riage drop.

18. Always set both weight rests at the same

height. The long adjustment knob must
always be inserted through both the weight
rest and upright and firmly tightened. Never
tighten the long adjustment knob into an
upright and then set a weight rest in the
upright on top of the long adjustment knob.

19. Always exercise with a partner. When you

are performing bench press exercises, squat
exercises or toe raise exercises, your partner
should stand behind you to catch the barbell
if you cannot complete a repetition.

20.  If you feel pain or dizziness at any time while

exercising, stop immediately and begin cool-
ing down.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially
important for persons over the age of 35 or persons with pre-existing health problems. Read all
instructions before using. ICON assumes no responsibility for personal injury or property damage
sustained by or through the use of this product. 

To reduce the risk of serious injury, read the following important
precautions before using the weight bench.

WARNING: 

Important Precautions

Summary of Contents for Pro 218
























Reviews: