9
6. Orient the the Bench Pad (13) so that the
bracket (A) on the Bench Frame (4) is in the
position shown.
Next, orient the Bench Leg (5) so that the Leg
Tab (24) is on the side shown.
Attach the Bench Leg (5) to the bracket (A) on
the Bench Frame (4) with an M8 x 100mm Bolt
(46), an M8 Washer (41), and an M8 Locknut
(42). Do not overtighten the Locknut; the
Bench Leg must be able to pivot.
6
4
5
A
13
24
42
46
41
7. Insert a Long Axle (36) into the other end of the
Bench Frame (4).
Attach the Bench Frame (4) to the Bench Base
(3) with two M8 x 15mm Screws (48) and two
M8 Washers (41). Tighten both Screws at the
same time.
7
41
41
48
48
3
4
36
Summary of Contents for FLEX-CTS WESY20318.0
Page 4: ...4 all STANDARD SERVICE PLANS ...
Page 21: ...21 NOTES ...
