6
1
27
35
35
41
41
1
10
31
1.
Orient one of the Uprights (1) so that the
Upright Cover (10) is on the side shown.
Next, identify one Joint Plate A (35) and one
Joint Plate B (41); the Joint Plates have “A” and
“B” stickers. Orient the Joint Plates as shown,
with the diamond patterns facing away from the
Upright (1).
Attach the Joint Plates (35, 41) to the Upright
(1) with two M10 x 68mm Bolts (27) and two
M10 Locknuts (31).
Do not tighten the
Locknuts yet.
Orient the other Upright (1) and the other
Joint Plates (35, 41) as shown; attach the
Joint Plates as described above.
1
To make assembly easier, read the
assembly tips at the top of this page
before beginning.
ASSEMBLY
• Assembly requires two persons.
• Because of its size and weight, assemble the
weight bench in the location where it will be
used. Make sure that there is enough clear-
ance to walk around the weight bench as you
assemble it.
• Place all parts in a cleared area and remove
the packing materials. Do not dispose of the
packing materials until you complete all
assembly steps.
• To identify small parts, see page 5.
• The following tools (not included) may be
required for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
