5
This product is designed to be used with air compressors having a regulated air
supply that CANNOT exceed 200 PSI. This product IS NOT designed to be used with
air compressors without an adjustable regulated output or are capable of exceeding
outlet pressures greater than 200 PSI.
Before operating this equipment, make sure that all parts are present. Compare parts
with package contents list. If any part is missing or damaged, do not attempt to
operate this equipment.
Estimated Assembly Time: 5 - 10 minutes
PACKAGE CONTENTS
PREPARATION
DESCRIPTION
Air Splitter
3/8 in. Air Inlet
1/4 in. Air Outlet (Regulated)
1/4 in. Air Outlet (Unregulated)
Pressure Gauge
Regulating Knob
Handle
QUANTITY
1
1
2
2
1
1
2
PART
A
B
C
D
E
F
G
A
B
C
E
D
F
G
The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
WARNING
Use proper size and type of air connection hose.
Any air connection hose must
be of the proper size and type to supply the correct current to the tool.
Always use clean and dry compressed air.
Compressed air which is not filtered
clean and dry will result in possible air passage block and/or parts rust.
