ASSEMBLY INSTRUCTIONS
6
Risk of bursting:
Can cause serious injury or death. Maximum 200 PSI inlet air
pressure. Never operate tools or accessories above marked maximum pressure.
Risk of unsafe operation:
Reduce air pressure to 60 PSI maximum in air
compressor tank before removing or connecting this air splitter to air compressor or
connecting accessory hoses to unregulated 1/4 in. air outlets (D).
Risk of unsafe operation:
Reduce air pressure by adjusting the regulating
knob (F) to 60 PSI maximum before removing or connecting air hoses to the
regulated air outlets (C). Regulator was factory set at 20 - 40 PSI.
Risk of unsafe operation:
Firmly grasp hose in hand when installing or
disconnecting to prevent hose whip.
Risk of unsafe operation:
Do not use damaged or worn accessories.
1. Reduce air pressure in air compressor tank to
60 PSI maximum.
Attach one end of air connection hose (not
included) with 3/8 in. quick-connect coupler
(not included) to air compressor air outlet.
WARNING
NOTE:
This air splitter allows remote air regulation closer to the work area.
1
2
2. Attach other end of air connection hose with
3/8 in. quick-connect coupler (not included) to
air inlet (B).
NOTE:
The air splitter (A) can be brought closer
to the work site and placed on flat surface.
NOTE:
The air splitter (A) can also be temporarily
mounted with handles (G). Whatever way is used
to mount the air splitter (A) to a stable place,
make sure that the air splitter is secure and safe.
