Cleaning method for coarse contamination
Î
Remove coarse
contamination by blowing out
with compressed air free of
oil and grease. Apply pressure
to the
wire filter insert (Pos. 3) via
the inner side, against the
flow direction.
Direction of flow
Î
Remove any residual contam-
ination on the outside with a
brush.
Note:
After removing coarse contamination, perform the cleaning procedure for fine
contamination.
Cleaning method for fine contamination
Î
Place the
wire filter insert (Pos. 3) into
an appropriate container with
suitable cleaning agent.
Note:
Please refer to chapter
Î
Then clean the wire filter
insert (Pos. 3) to remove any
cleaning agent by blowing
it out with oil and grease
free compressed air. Apply
pressure to the filter via the
inner side, against the flow
direction.
Direction of flow
MD-10012-L51-R1.1.0-03
Page 22
Operating instructions
AE
Summary of Contents for TSF4
Page 2: ......
