WEGER WALTER GMBH DIWER EVO DP80 Series, Installation And Operating Manual

Page: 8 / 64

Installation and Operating Manual Page
6
Printed: 02/2015
1. General information
The installation and operating manual forms part of the scope of delivery of your product and
must be filed near the unit where it is accessible at all times. All persons carrying out work on
the machine must have read this manual and adhere to all instructions. For work on unit
elements and built-in assemblies that are not covered in this document, refer to the separate
manual.
1.1. Unit series
WEGER produces units for a wide range of applications.
This manual applies to the following series
:
Series:
DIWER EVO
DIWER EVO PU
DIWER EVO DP80
DIWER TE
DIWER TE PU
DIWER
DIWER PU
Design:
Series: Profile Panelling Insulation Sealing
DIWER EVO thermally decoupled with plastic frame Rock wool
PUR foam
(sprayed on)
DIWER EVO PU thermally decoupled with plastic frame PU foam
PUR foam
(sprayed on)
DIWER EVO DP80 thermally decoupled with plastic frame
40 mm rock wool +
40 mm PU board
PUR foam
(sprayed on)
DIWER TE thermally decoupled without plastic frame Rock wool
Hollow seal
(clamped)
DIWER TE PU thermally decoupled without plastic frame PU foam
Hollow seal
(clamped)
DIWER not decoupled without plastic frame Rock wool
Hollow seal
(clamped)
DIWER PU not decoupled without plastic frame PU foam
Hollow seal
(clamped)