WEGER WALTER GMBH DIWER EVO DP80 Series, Installation And Operating Manual

Page: 36 / 64

Installation and Operating Manual Page
34
Printed: 02/2015
When installing the actuator motor, ensure that the electric cables don't obstruct the
operation of the damper. The adapter can also be retrofitted into the multi-leaf damper. To do
this, cut out the respective section in the damper flange.
6.7. Electrical connections
All work on the electrical system of the unit must be performed by qualified electricians and in
compliance with the applicable international standards and statutory regulations. To install the
power cables to the electrical components located inside the unit (e.g. fan drive motor,
electrical actuator motors, lighting system, etc.), drill the unit panelling at appropriate
locations. Install cable glands. The cable glands must be air-tight.
6.7.1 Holes for cables and glands
Hole diameters for cable glands in Sandwich panels