background image

20

espresso coffee machine - user instructions

English

READ CAREFULLY

all parts of this manual before using the product.
  The espresso coffee machine that you have purchased has been designed and manufactured with innovative methods and 
technology which ensure long lasting quality and reliability.
  This manual will guide you in discovering the advantages of selecting this product. You will find information on how to get the 
best out of your machine, how to always keep it efficient and what to do if you should have any problems.
  Keep this manual in a safe place. If you lose it, you can ask the manufacturer for another copy.

ENJOY YOUR READING … AND YOUR COFFEE

HOW TO USE THIS MANUAL

  The manufacturer has the right to make any improvements on the product. We also guarantee that this manual reflects the 
technical state of the product at the time it is marketed.
  We would like to take this opportunity to invite the customers to make any suggestions for improvement of the product or the 
manual.

GENERAL WARNINGS

•  After removing the packaging, check the condition of the appliance. If in doubt, do not use it but contact the retailer directly.
•  The packaging material must not be left within the reach of children since it is a potential source of danger. It is advisable to 

keep the packaging until after the guarantee has expired.

•  Before using the machine, make sure that the mains voltage corresponds to the information on the data plate of the ma-

chine.

•  The installation must be done in accordance with the safety standards in force and by qualified and trained personnel. Incor-

rect installation may be harmful to people, property or animals.

•  This appliance is completely safe only if it is connected to an effective grounding system, executed as required by current safety 

standards. It is important to have compliance with this requirement checked. If in doubt, have the system carefully checked by qualified 

personnel. The manufacturer cannot be considered responsible for any damage caused by an incorrect grounding device.

•  Upon installation of the machine, qualified personnel will be required to install a main switch as required by current safety 

regulations, with a contact aperture of at least 3 mm. 

•  It is not advisable to use extensions or electrical adaptors with multiple outlets. If their use is indispensable, use only simple or 

multiple plug adaptors and extensions which are in accordance with the safety standards in force. Never exceed the capacity 

value in kW indicated on the simple adaptor or the extensions or the maximum power value indicated on the adaptor.

Summary of Contents for LB 4100























Reviews: