Mechanical Installation
MOD1...MOD7 | 3-1
3
3 MECHANICAL INSTALLATION
The directions and suggestions must be observed to ensure the safety of people and the proper operation of the
equipment.
The installation procedure described below is the same for all modules.
3.1 CONNECTION OF THE ACCESSORIES
To connect the MODx expansion module to an RUW100 or another MODx, proceed as follows:
1. Remove the communication bus closure.
2. Insert the module into the RUW100 (or other accessory) in the direction indicated by 2.
3. Reinstall the communication bus closure.
4. Accessory connected.
1
3
4
2
Figure 3.1:
Connection of the accessories
