www.weg.net
Instruction manual for mounting and service of fuse switch disconnectors
18
6.
AUXILIARY CONTACT BLOCK
6.1. MOUNTING OF AUXILIARY BLOCK
The conductors of auxiliary contact block should be arranged according to the figure
above, push the auxiliary contact according to the directions of the arrows.
6.2. DISMOUNTING OF AUXILIARY BLOCK
Hold and pull the auxiliary contact block as shown below:
7. PROCEEDING WITH THE MATERIAL UTILIZED
FSW type fuse switch disconnectors are manufactured with the use of materials and
technology which are not harmful to the natural environment.
Obligatory regulations regarding protection of the environment should be respected.
The product utilized should be dismantled and metal parts should be apart from plastic
ones. Useless metal parts should be segregated to non- ferrous metals and others and
they are to be scraped. Plastic parts which can be recycled should be sent to recycling
company. Plastic parts which can not be recycled should be sent to utilization company.
Cardboard packaging and plastic bags which are recycled should be sent to recycling
companies. In case of any doubts please contact with the manufacturer.
8. TRANSPORT AND STORAGE CONDITIONS
Storage should be performed in original packaging, in dry and clean rooms at
temperature higher than -5
o
C and related humidity not higher than 80% at temperature
+35
o
C. At the highest tempe40
o
C air humidity should not be higher than 50%.
Auxiliary contact block
Exit point of conductors
Auxiliary contact block
