www.weg.net
Instruction manual for mounting and service of fuse switch disconnectors
12
1. BASIC OPERATIONS
1.1. OPENING THE COVER
g
Take the handle and open the cover up to firm resistance (Figure 1).
1.2. CLOSING THE COVER
g
Take the handle and close the cover up to firm resistance (Figure 2);
g
Move the cover along the base of the disconnector and then take off the cover (Figure 3).
1.3. TAKING OFF THE COVER
g
Open the cover (acc. to chapter 1.1);
g
Move the cover along the base of the disconnector and then take off the cover (Figure 3).
1.4. MOUNTING THE COVER
g
Insert the cover into the base of disconnector and then move the cover along the base
of disconnector up to firm resistance (Figure 4).
1.5. TAKING OFF THE SHIELD FOR TERMINALS
g
Take selected shield for terminals (Figure 5) and deflect by a screwdriver one of the
fasteners of the shield (Figure 6) 1 and then deflect the second fastener of the cover
(Figure 7) 2 and at the same time withdraw selected shield for terminals from the base
(Figure 8).
Figure 1
Figure 2
Figure 3
Figure 4
