English
Diagram to signals
Figure 8:
Standard phase of the encoder signals
4. opERaTion
step 1:
After installing the module, energize the inverter;
step 2:
Check if the module has been correctly identified by the control:
P0027=xxC2;
step 3:
Program parameter P0202 (Type of control) = 4 (Vectorial with encoder).
This way, the inverter will operate with speed feedback for the encoder in-
cremental. The number of pulses per encoder rotation must be programmed
in P0405.
noTE!
See the CFW11 Manual for more details on the Vectorial Control.
Signal
A
A
B
B
Time
Summary of Contents for ENC-01
Page 21: ...www weg net 0899 5485_E S P 1 ...
